Digital Readouts:
TI 500 BW With Cattle Motion
110Volt or 6 C size batteries.....................$349.00USD
Auto Power Off
Period
Selects the auto off time period in minutes:
"Off" = Disabled (Always
On)
Hold Mode
Enable
Activates the "Hold: mode where weight of the object
on the platform is frozen on the display until the applied
weight is decreased to one half of the memorized weight.
This is used in conjunction with the Motion Band setting
to capture an unstable load, such as livestock
Motion Band
Sets the level at which motion is detected by comparing
the present display update with the previous one. If motion
is not detected for two seconds or more, scale is in standstill
and can process a Print or Zero command. Maximum value varies
depending on local regulations
Digital Filter
Averages weight readings to produce higher stability. The
higher the filter setting, the greater the stability but
the slower the indicator’s response time.
ANALOG SPECIFICATIONS
Internal Resolution
Approximately 130,000 counts
Excitation Voltage
+5VDC, 4 x350W load cells
POWER
Alkaline Batteries
6 – "C" Size Cells
Rechargeable Battery
6 VDC, 3.0 Ah lead acid
AC Adapter –
Alkaline Batteries 12 VDC, 500mA Female
AC Adapter –
Rechargeable Battery 12 VDC, 800mA Female
Power Consumption
_ TI-500BW 80mA + 30mA per 350W Loadcell
MECHANICAL
Overall Dimensions
– Plastic 8.1" x 11.8" x 3.9" (205mm
x 300mm x 100mm)
TI
1000 Same as above in stainless..........$449.00USD
